Search results

Oilequip - Fabricante de equipamentos de produção de Petróleo e Gás - Árvores de Natal - Cabeças de poço - PLET - PLEM - Manifold - Válvulas Technological Solutions for the Oil and Gas industry 30000sqm factory in R.J BR 2500m deepest equipment to date 2009y first subsea equipment installed end-to-end support and beyond from design through manufacturing, to delivery and operational support 250k+ equipment delivered For us, disruption is not a concept. This is what we do every day, helping to redefine the standards of the oil and gas market. Válvulas Gaveta Submarinas Instalação Skid BCS - Mobo Choke Manifold de Superfície Válvulas Gaveta Submarinas 1/28 We support the main operators, on land and at sea Surface Subsea Services ESG Environmental Social Governance We are a 100% Brazilian company, developing technology for Brazil and the world.

Subsea Products All our products are designed for high performance and reliability under the most severe operating conditions. For the most varied applications in Oil and Gas, including extreme operating pressures of up to 15,000 psi with the presence of H2S, CO2, steam, corrosive water or abrasive fluids. ANM - Oilequip PLET - Pipe Line End Termination - Oilequip ILT - Oilequip ESDV - Oilequip MOBO - Subsea Pumping Module Connectors -Oilequip Swivel - Oilequip Manifold - Oilequip PLEM - Pipe Line End Manifold - Oilequip ILS - Oilequip Skid BCS - Subsea Pumping Module UTA - Oilequip MCV - Oilequip Mudline -Oilequip Mudline -Oilequip

PIG Chamber Cap Oilequip PIG Chamber Cap Standard: API / ASME / MSS DN: 3", 4", 6", 8", 10", 12", 14", 16", 18", 20", 22", 24" Pressure Class: ASME - 150 / 300 / 600 / 900 / 1500 / 2500 Working temperature: -29ºC to 180ºC Material: ASTM A105 / ASTM A216 gr WCB

Coating Reels PC-22 Coating Reel The Oilequip PC-22 Casing Reel is designed to receive either the PC-21 or PC-22 casing hangers. Each of these hangers can support weight beyond the strength of the pipe joint. These hangers can be installed through the BOP. It has the same characteristics as the PC-22 casing head, except that this model has a flanged lower end with preparation for the OO/UU type secondary seal set or reduction bushing. These coating reels are supplied with two threaded or flanged side outlets, they can be supplied with special side outlets if required. PC-29 Coating Reel The Oilequip PC-22 Casing Reel is designed for heavier duty service and hanging longer lengths of casing. The PC-29 design features locking bolts located on the top flange, used to secure the PC-29 casing hanger or lock the casing protector during drilling. It has the same characteristics as the PC-29 casing head, except that this model has a flanged lower end with preparation for the OO/UU type secondary seal assembly or reduction bushing. These coating reels are supplied with two threaded or flanged side outlets, they can be supplied with special side outlets if required.

Cabeças de Revestimento para poços de Petroleo e Gás Casing Heads PC-22 Casing Head The Oilequip PC-22 Casing Head is designed to receive the PC-21 or PC-22 casing hangers. Each of these hangers can support weight beyond the strength of the pipe joint. These hangers can be installed through the BOP. There are two standard types of casing pipe connections to the PC-22 head, the casing can be threaded internally to the lower part of the head or by fitting the casing inside the head and welding it. These casing heads are supplied with their side outlets threaded or flanged, and can be supplied with special side outlets if required. PC-29 Coating Head The Oilequip PC-29 Casing Head is designed for heavier duty and longer casing lengths. They are supplied with threaded or weld-on bottom connections. The PC-29 design has locking screws located on the top flange, used to secure the PC-29 casing hanger or to lock the housing protector during drilling. These casing heads are supplied with two threaded or flanged side outlets, and can be supplied with special side outlets if required.

Submarine Manifold Oilequip Subsea Manifold Operating Depth (LDA): 300 meters Design working pressure 3,000 psi Process Fluid: Oil Injection Fluid: Lift Gas Nominal diameter: 2" to 6" Design Standards: API 6A, API 17D and ISO 13628-15 Material class: EE PSL: 3

UTA UTA Oilequip Provides hydraulic, chemical, fiber optic and electrical distribution between the control umbilical and the subsea system. Operating Depth (LDA): 2,500 meters Working Pressure: 5,000 psi Hydraulic Pressure: 3,000 psi (control) Process Fluid: Oil and Gas Nominal diameter: up to 14" Design Standards: API 6A and API 17D Working temperature: "U" -18ºC to 121ºC Material class: HH PSL: 3G

ESDV ESDV Oilequip It is a valve designed to stop the flow of a hazardous fluid in case of detection of a risk event. Operating Depth (LDA): 1,600 meters Working Pressure: 10,000 psi Process Fluid: Oil and Gas Nominal diameter: up to 14" Design Standards: API 6A and API 17D Working temperature: "U" -18ºC to 121ºC Material class: EE

Valves Model 330 Gate Valve (Metal-to-Metal Seal) The Oilequip Model 330 Gate Valve was developed for high-reliability applications with high pressures in water, oil and gas services. It has a metal-to-metal seal between seats and a gate. Available in working pressures of 10,000 and 15,000 psi, and is supplied with flanged connections. It meets all API-6A and NACE MR 01.75 requirements for corrosive applications. This valve can be supplied with manual or hydraulic actuation. Features: Bidirectional flow sealing Seats and drawer with special high-resistance surface hardening Self-energizing rod packing Seats with metal-to-metal counter-sealing Low operating torque Stem Safety Shear Pin Metal-to-Metal seal between body and bonnet Gate Valve Model 320 (Metal-to-Metal Seal) The Oilequip Model 320 Gate Valve was developed for more severe applications with water, oil and gas, with sealing between seats and metal-to-metal gate. Available in working pressures up to 5,000 psi, and can be supplied with flanged or threaded connections. Considered a simple and reliable solution for wellhead systems. Meets all API-6A and NACE MR 01.75 requirements for corrosive applications. This valve can be supplied with manual, pneumatic or hydraulic actuation. Features: Bidirectional flow sealing Seats and drawer with special surface hardening Self-energizing rod packing Seats with metal-to-metal counter-sealing Low operating torque Stainless steel drawer guides Stem Safety Shear Pin Metal-to-Metal seal between body and bonnet Gate Valve Model 310 (Soft Seal) The Oilequip Model 310 Gate Valve was developed for water, oil and gas applications. Available in working pressures up to 5,000 psi, it can be supplied with flanged or threaded ends. It meets all API-6A and NACE MR 01.75 requirements for corrosive applications. This valve can be supplied with manual, pneumatic or hydraulic actuation. Features: Bidirectional flow sealing Seats with resilient insert Rod packing in thermoplastic material Low operating torque Stainless steel drawer guides Stem Safety Shear Pin Metal-to-Metal seal between body and bonnet Gate Valve Model 350 (Steam Injection) The Oilequip Model 350 Gate Valve was developed for steam injection services in wellheads and Christmas trees. It has a metal-to-metal seal between seats and gate, and can be supplied with flanged or threaded connections. It was designed for severe high-temperature applications, up to 350ºC. Features: Bidirectional flow sealing Seats and drawer with high-resistance surface coating Special seals for high temperatures Low operating torque Stem Safety Shear Pin Metal-to-Metal seal between body and bonnet Gate Valve for Abrasive Fluids The Oilequip Gate Valve for Abrasive Fluids was developed using the sealing principle that meets the rigorous requirements in oil well drilling. Available in working pressures up to 7,500 psi, it can be supplied with flanged, threaded or weld fitting connections. Its 'top entry' design allows disassembly and removal of the internals for replacement, without removing the valve from the line. Its expandable seat system provides watertightness even after long use in abrasive service. Features: Abrasion and corrosion resistance Easy field repair Easy operation under pressure Requires few turns to open and close Headquarters expansion Model 200 Ball Valve (Soft Seal) The Oilequip Model 200 Ball Valve was developed for water, oil and gas applications, meeting all API-6A requirements. Available in working pressures up to 5,000 psi, and can be supplied with flanged or threaded ends. Check Valve Model 400 The Oilequip Model 400 Ball Valve was developed for safety applications. It has a metal-to-metal seal between the seat and piston. Available in working pressures up to 5,000 psi, and can be supplied with flanged or threaded connections. It was designed for working temperatures up to 350ºC. Meets all API-6A requirements Needle Valve Model 100 (Metal-to-Metal Seal) The Oilequip Model 100 Needle Valve was developed for applications in wellheads, Christmas trees and manifolds. Available with threaded ends, FF (female-female), MF (male-female) and MFL (male-female angular) models. It was designed for operating temperatures up to 350ºC and working pressures up to 10,000 psi. It meets all API-6A and NACE MR 01.75 requirements for corrosive applications.

Accessories Tees and Crosses Flange Adapters Nipples and Plugs

Sustainability ESG At Oilequip, we believe that the future depends on the actions we take today. That’s why we strive to put sustainability at the heart of everything we do. Environmental Sustainable Materials: We use sustainable raw materials in our entire product line We encourage our customers to further increase the useful life of the products we produce, through our equipment remanufacturing service. We have a sector dedicated to Remanufacturing, where we strictly follow all technical standards and the Oilequip quality and reliability standard. In this way, we give our client operators the option to multiply the useful life of their equipment, which already has a high level of durability, many times over. Reduction of CO2 Emissions: Oilequip is focused on reducing carbon emissions, whether through investments in alternative energy generation for plant consumption or through the development of technology for CO2 reinjection. Waste Management: We use recycling practices when applied and we carry out Waste Management, hiring third-party companies licensed by municipal authorities for responsible disposal. Solar Power Generation Panels CO2 injection test well Social Oilequip Produtos e Serviços recognizes as a corporate strategy the excellence in the activities of manufacturing and recovery of equipment for the oil and gas sector, based on the quality of its products and services, environmental protection, promotion of health and safety, in addition to the commitment to be socially responsible, according to the guidelines below: Comply with SMS legislation and other legal and contractual requirements applicable to its activities; Continuously improve your SMS performance, seeking to minimize adverse impacts, reduce risks and prevent pollution; Educate, train, raise awareness and value the good performance of its professionals, suppliers and partners in HSE issues; Maintain ongoing dialogue with employees, environmental authorities, the community, customers and suppliers; Ensure the health and safety of its employees and third parties, understanding this as a priority premise in the company's operations; Adopt appropriate practices to efficiently use natural resources and combat waste; Ensure the necessary resources to achieve adequate standards and continuous improvement of the HSE Management System; Contribute to improving people's quality of life, promoting ethics and sustainable development. President. November 18, 2010 Oilequip SMS Policy Governance Oilequip, guided by its Board of Directors and leadership, maintains a corporate structure aligned with its values, aiming to achieve goals and objectives. Our Business Ethics Policy ensures that we conduct our business ethically and legally in any location, and we extend this expectation to all of our partners. Oilequip's pillars of action Acting with honesty, integrity and compliance with the law, avoiding conflicts of interest and the use of privileged information. Oilequip does not engage in practices that violate competition laws , demanding ethics and transparency throughout the Supply Chain. We are committed to ethics, integrity and legality in all our operations, from internal management to our relationships with our partners and suppliers. We are committed to ensuring our employees, partners and customers a safe, professional environment free from any type of discrimination .

Subsea Connector - Oilequip Oilequip Hydraulic Connector Operating Depth (LDA): 2,500 meters Working Pressure: 5,000 psi Process Fluid: Oil and Gas Nominal diameter: from 8" to 14" 13 5/8" Flange 5,000 psi Design Standards: API 6A and API 17D Working temperature: "U" -18ºC to 121ºC Material class: HH PSL: 3G Metal/Metal Sealing